move commands and keymap back to terminal.

Command needs to be able to deal with UI. We'll separate it again later
on.

4 files changed, 0 insertions, 1026 deletions

diff --git a/helix-view/src/commands.rs b/helix-view/src/commands.rs
deleted file mode 100644
index c135a3da..00000000
--- a/helix-view/src/commands.rs
+++ /dev/null
@@ -1,680 +0,0 @@
-use helix_core::{
-    graphemes,
-    indent::TAB_WIDTH,
-    regex::Regex,
-    register, selection,
-    state::{Direction, Granularity, State},
-    ChangeSet, Range, Selection, Tendril, Transaction,
-};
-use once_cell::sync::Lazy;
-
-use crate::{
-    document::Mode,
-    prompt::Prompt,
-    view::{View, PADDING},
-};
-
-pub struct Context<'a, 'b> {
-    pub count: usize,
-    pub view: &'a mut View,
-    pub executor: &'a smol::Executor<'b>,
-}
-
-/// A command is a function that takes the current state and a count, and does a side-effect on the
-/// state (usually by creating and applying a transaction).
-pub type Command = fn(cx: &mut Context);
-
-pub fn move_char_left(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .move_selection(Direction::Backward, Granularity::Character, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn move_char_right(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .move_selection(Direction::Forward, Granularity::Character, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn move_line_up(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .move_selection(Direction::Backward, Granularity::Line, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn move_line_down(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .move_selection(Direction::Forward, Granularity::Line, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn move_line_end(cx: &mut Context) {
-    let lines = selection_lines(&cx.view.doc.state);
-
-    let positions = lines
-        .into_iter()
-        .map(|index| {
-            // adjust all positions to the end of the line.
-
-            // Line end is pos at the start of next line - 1
-            // subtract another 1 because the line ends with \n
-            cx.view.doc.text().line_to_char(index + 1).saturating_sub(2)
-        })
-        .map(|pos| Range::new(pos, pos));
-
-    let selection = Selection::new(positions.collect(), 0);
-
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn move_line_start(cx: &mut Context) {
-    let lines = selection_lines(&cx.view.doc.state);
-
-    let positions = lines
-        .into_iter()
-        .map(|index| {
-            // adjust all positions to the start of the line.
-            cx.view.doc.text().line_to_char(index)
-        })
-        .map(|pos| Range::new(pos, pos));
-
-    let selection = Selection::new(positions.collect(), 0);
-
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn move_next_word_start(cx: &mut Context) {
-    let pos = cx.view.doc.state.move_pos(
-        cx.view.doc.selection().cursor(),
-        Direction::Forward,
-        Granularity::Word,
-        cx.count,
-    );
-
-    cx.view.doc.set_selection(Selection::point(pos));
-}
-
-pub fn move_prev_word_start(cx: &mut Context) {
-    let pos = cx.view.doc.state.move_pos(
-        cx.view.doc.selection().cursor(),
-        Direction::Backward,
-        Granularity::Word,
-        cx.count,
-    );
-
-    cx.view.doc.set_selection(Selection::point(pos));
-}
-
-pub fn move_next_word_end(cx: &mut Context) {
-    let pos = State::move_next_word_end(
-        &cx.view.doc.text().slice(..),
-        cx.view.doc.selection().cursor(),
-        cx.count,
-    );
-
-    cx.view.doc.set_selection(Selection::point(pos));
-}
-
-pub fn move_file_start(cx: &mut Context) {
-    cx.view.doc.set_selection(Selection::point(0));
-
-    cx.view.doc.mode = Mode::Normal;
-}
-
-pub fn move_file_end(cx: &mut Context) {
-    let text = &cx.view.doc.text();
-    let last_line = text.line_to_char(text.len_lines().saturating_sub(2));
-    cx.view.doc.set_selection(Selection::point(last_line));
-
-    cx.view.doc.mode = Mode::Normal;
-}
-
-pub fn check_cursor_in_view(view: &View) -> bool {
-    let cursor = view.doc.selection().cursor();
-    let line = view.doc.text().char_to_line(cursor);
-    let document_end = view.first_line + view.size.1.saturating_sub(1) as usize;
-
-    if (line > document_end.saturating_sub(PADDING)) | (line < view.first_line + PADDING) {
-        return false;
-    }
-    true
-}
-
-pub fn page_up(cx: &mut Context) {
-    if cx.view.first_line < PADDING {
-        return;
-    }
-
-    cx.view.first_line = cx.view.first_line.saturating_sub(cx.view.size.1 as usize);
-
-    if !check_cursor_in_view(cx.view) {
-        let text = cx.view.doc.text();
-        let pos = text.line_to_char(cx.view.last_line().saturating_sub(PADDING));
-        cx.view.doc.set_selection(Selection::point(pos));
-    }
-}
-
-pub fn page_down(cx: &mut Context) {
-    cx.view.first_line += cx.view.size.1 as usize + PADDING;
-
-    if cx.view.first_line < cx.view.doc.text().len_lines() {
-        let text = cx.view.doc.text();
-        let pos = text.line_to_char(cx.view.first_line as usize);
-        cx.view.doc.set_selection(Selection::point(pos));
-    }
-}
-
-pub fn half_page_up(cx: &mut Context) {
-    if cx.view.first_line < PADDING {
-        return;
-    }
-
-    cx.view.first_line = cx
-        .view
-        .first_line
-        .saturating_sub(cx.view.size.1 as usize / 2);
-
-    if !check_cursor_in_view(cx.view) {
-        let text = &cx.view.doc.text();
-        let pos = text.line_to_char(cx.view.last_line() - PADDING);
-        cx.view.doc.set_selection(Selection::point(pos));
-    }
-}
-
-pub fn half_page_down(cx: &mut Context) {
-    let lines = cx.view.doc.text().len_lines();
-    if cx.view.first_line < lines.saturating_sub(cx.view.size.1 as usize) {
-        cx.view.first_line += cx.view.size.1 as usize / 2;
-    }
-    if !check_cursor_in_view(cx.view) {
-        let text = cx.view.doc.text();
-        let pos = text.line_to_char(cx.view.first_line as usize);
-        cx.view.doc.set_selection(Selection::point(pos));
-    }
-}
-// avoid select by default by having a visual mode switch that makes movements into selects
-
-pub fn extend_char_left(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .extend_selection(Direction::Backward, Granularity::Character, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn extend_char_right(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .extend_selection(Direction::Forward, Granularity::Character, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn extend_line_up(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .extend_selection(Direction::Backward, Granularity::Line, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn extend_line_down(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .extend_selection(Direction::Forward, Granularity::Line, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn split_selection_on_newline(cx: &mut Context) {
-    let text = &cx.view.doc.text().slice(..);
-    // only compile the regex once
-    #[allow(clippy::trivial_regex)]
-    static REGEX: Lazy<Regex> = Lazy::new(|| Regex::new(r"\n").unwrap());
-    let selection = selection::split_on_matches(text, cx.view.doc.selection(), &REGEX);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn select_line(cx: &mut Context) {
-    // TODO: count
-    let pos = cx.view.doc.selection().primary();
-    let text = cx.view.doc.text();
-    let line = text.char_to_line(pos.head);
-    let start = text.line_to_char(line);
-    let end = text.line_to_char(line + 1).saturating_sub(1);
-
-    cx.view.doc.set_selection(Selection::single(start, end));
-}
-
-pub fn delete_selection(cx: &mut Context) {
-    let transaction = Transaction::change_by_selection(&cx.view.doc.state, |range| {
-        (range.from(), range.to() + 1, None)
-    });
-    cx.view.doc.apply(&transaction);
-
-    append_changes_to_history(cx);
-}
-
-pub fn change_selection(cx: &mut Context) {
-    delete_selection(cx);
-    insert_mode(cx);
-}
-
-pub fn collapse_selection(cx: &mut Context) {
-    let selection = cx
-        .view
-        .doc
-        .selection()
-        .transform(|range| Range::new(range.head, range.head));
-
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn flip_selections(cx: &mut Context) {
-    let selection = cx
-        .view
-        .doc
-        .selection()
-        .transform(|range| Range::new(range.head, range.anchor));
-
-    cx.view.doc.set_selection(selection);
-}
-
-fn enter_insert_mode(cx: &mut Context) {
-    cx.view.doc.mode = Mode::Insert;
-
-    append_changes_to_history(cx);
-}
-// inserts at the start of each selection
-pub fn insert_mode(cx: &mut Context) {
-    enter_insert_mode(cx);
-
-    let selection = cx
-        .view
-        .doc
-        .selection()
-        .transform(|range| Range::new(range.to(), range.from()));
-    cx.view.doc.set_selection(selection);
-}
-
-// inserts at the end of each selection
-pub fn append_mode(cx: &mut Context) {
-    enter_insert_mode(cx);
-    cx.view.doc.restore_cursor = true;
-
-    // TODO: as transaction
-    let text = &cx.view.doc.text().slice(..);
-    let selection = cx.view.doc.selection().transform(|range| {
-        // TODO: to() + next char
-        Range::new(
-            range.from(),
-            graphemes::next_grapheme_boundary(text, range.to()),
-        )
-    });
-    cx.view.doc.set_selection(selection);
-}
-
-// TODO: I, A, o and O can share a lot of the primitives.
-pub fn command_mode(_cx: &mut Context) {
-    unimplemented!()
-}
-
-// calculate line numbers for each selection range
-fn selection_lines(state: &State) -> Vec<usize> {
-    let mut lines = state
-        .selection
-        .ranges()
-        .iter()
-        .map(|range| state.doc.char_to_line(range.head))
-        .collect::<Vec<_>>();
-
-    lines.sort_unstable(); // sorting by usize so _unstable is preferred
-    lines.dedup();
-
-    lines
-}
-
-// I inserts at the start of each line with a selection
-pub fn prepend_to_line(cx: &mut Context) {
-    enter_insert_mode(cx);
-
-    move_line_start(cx);
-}
-
-// A inserts at the end of each line with a selection
-pub fn append_to_line(cx: &mut Context) {
-    enter_insert_mode(cx);
-
-    move_line_end(cx);
-}
-
-// o inserts a new line after each line with a selection
-pub fn open_below(cx: &mut Context) {
-    enter_insert_mode(cx);
-
-    let lines = selection_lines(&cx.view.doc.state);
-
-    let positions: Vec<_> = lines
-        .into_iter()
-        .map(|index| {
-            // adjust all positions to the end of the line/start of the next one.
-            cx.view.doc.text().line_to_char(index + 1)
-        })
-        .collect();
-
-    // TODO: use same logic as insert_newline for indentation
-    let changes = positions.iter().copied().map(|index|
-        // generate changes
-        (index, index, Some(Tendril::from_char('\n'))));
-
-    // TODO: count actually inserts "n" new lines and starts editing on all of them.
-    // TODO: append "count" newlines and modify cursors to those lines
-
-    let selection = Selection::new(
-        positions
-            .iter()
-            .copied()
-            .map(|pos| Range::new(pos, pos))
-            .collect(),
-        0,
-    );
-
-    let transaction = Transaction::change(&cx.view.doc.state, changes).with_selection(selection);
-
-    cx.view.doc.apply(&transaction);
-}
-
-// O inserts a new line before each line with a selection
-
-fn append_changes_to_history(cx: &mut Context) {
-    if cx.view.doc.changes.is_empty() {
-        return;
-    }
-
-    let new_changeset = ChangeSet::new(cx.view.doc.text());
-    let changes = std::mem::replace(&mut cx.view.doc.changes, new_changeset);
-    // Instead of doing this messy merge we could always commit, and based on transaction
-    // annotations either add a new layer or compose into the previous one.
-    let transaction = Transaction::from(changes).with_selection(cx.view.doc.selection().clone());
-
-    // increment document version
-    // TODO: needs to happen on undo/redo too
-    cx.view.doc.version += 1;
-
-    // TODO: trigger lsp/documentDidChange with changes
-
-    // HAXX: we need to reconstruct the state as it was before the changes..
-    let old_state = std::mem::replace(&mut cx.view.doc.old_state, cx.view.doc.state.clone());
-    // TODO: take transaction by value?
-    cx.view
-        .doc
-        .history
-        .commit_revision(&transaction, &old_state);
-
-    // TODO: notify LSP of changes
-}
-
-pub fn normal_mode(cx: &mut Context) {
-    cx.view.doc.mode = Mode::Normal;
-
-    append_changes_to_history(cx);
-
-    // if leaving append mode, move cursor back by 1
-    if cx.view.doc.restore_cursor {
-        let text = &cx.view.doc.text().slice(..);
-        let selection = cx.view.doc.selection().transform(|range| {
-            Range::new(
-                range.from(),
-                graphemes::prev_grapheme_boundary(text, range.to()),
-            )
-        });
-        cx.view.doc.set_selection(selection);
-
-        cx.view.doc.restore_cursor = false;
-    }
-}
-
-pub fn goto_mode(cx: &mut Context) {
-    cx.view.doc.mode = Mode::Goto;
-}
-
-// NOTE: Transactions in this module get appended to history when we switch back to normal mode.
-pub mod insert {
-    use super::*;
-    // TODO: insert means add text just before cursor, on exit we should be on the last letter.
-    pub fn insert_char(cx: &mut Context, c: char) {
-        let c = Tendril::from_char(c);
-        let transaction = Transaction::insert(&cx.view.doc.state, c);
-
-        cx.view.doc.apply(&transaction);
-    }
-
-    pub fn insert_tab(cx: &mut Context) {
-        insert_char(cx, '\t');
-    }
-
-    pub fn insert_newline(cx: &mut Context) {
-        let transaction = Transaction::change_by_selection(&cx.view.doc.state, |range| {
-            let indent_level = helix_core::indent::suggested_indent_for_pos(
-                cx.view.doc.syntax.as_ref(),
-                &cx.view.doc.state,
-                range.head,
-            );
-            let indent = " ".repeat(TAB_WIDTH).repeat(indent_level);
-            let mut text = String::with_capacity(1 + indent.len());
-            text.push('\n');
-            text.push_str(&indent);
-            (range.head, range.head, Some(text.into()))
-        });
-        cx.view.doc.apply(&transaction);
-    }
-
-    // TODO: handle indent-aware delete
-    pub fn delete_char_backward(cx: &mut Context) {
-        let text = &cx.view.doc.text().slice(..);
-        let transaction = Transaction::change_by_selection(&cx.view.doc.state, |range| {
-            (
-                graphemes::nth_prev_grapheme_boundary(text, range.head, cx.count),
-                range.head,
-                None,
-            )
-        });
-        cx.view.doc.apply(&transaction);
-    }
-
-    pub fn delete_char_forward(cx: &mut Context) {
-        let text = &cx.view.doc.text().slice(..);
-        let transaction = Transaction::change_by_selection(&cx.view.doc.state, |range| {
-            (
-                range.head,
-                graphemes::nth_next_grapheme_boundary(text, range.head, cx.count),
-                None,
-            )
-        });
-        cx.view.doc.apply(&transaction);
-    }
-}
-
-pub fn insert_char_prompt(prompt: &mut Prompt, c: char) {
-    prompt.insert_char(c);
-}
-
-// Undo / Redo
-
-pub fn undo(cx: &mut Context) {
-    if let Some(revert) = cx.view.doc.history.undo() {
-        cx.view.doc.version += 1;
-        cx.view.doc.apply(&revert);
-    }
-
-    // TODO: each command could simply return a Option<transaction>, then the higher level handles storing it?
-}
-
-pub fn redo(cx: &mut Context) {
-    if let Some(transaction) = cx.view.doc.history.redo() {
-        cx.view.doc.version += 1;
-        cx.view.doc.apply(&transaction);
-    }
-}
-
-// Yank / Paste
-
-pub fn yank(cx: &mut Context) {
-    // TODO: should selections be made end inclusive?
-    let values = cx
-        .view
-        .doc
-        .state
-        .selection()
-        .fragments(&cx.view.doc.text().slice(..))
-        .map(|cow| cow.into_owned())
-        .collect();
-
-    // TODO: allow specifying reg
-    let reg = '"';
-    register::set(reg, values);
-}
-
-pub fn paste(cx: &mut Context) {
-    // TODO: allow specifying reg
-    let reg = '"';
-    if let Some(values) = register::get(reg) {
-        let repeat = std::iter::repeat(
-            values
-                .last()
-                .map(|value| Tendril::from_slice(value))
-                .unwrap(),
-        );
-
-        // TODO: if any of values ends \n it's linewise paste
-        //
-        // p => paste after
-        // P => paste before
-        // alt-p => paste every yanked selection after selected text
-        // alt-P => paste every yanked selection before selected text
-        // R => replace selected text with yanked text
-        // alt-R => replace selected text with every yanked text
-        //
-        // append => insert at next line
-        // insert => insert at start of line
-        // replace => replace
-        // default insert
-
-        let linewise = values.iter().any(|value| value.ends_with('\n'));
-
-        let mut values = values.into_iter().map(Tendril::from).chain(repeat);
-
-        let transaction = if linewise {
-            // paste on the next line
-            // TODO: can simply take a range + modifier and compute the right pos without ifs
-            let text = cx.view.doc.text();
-            Transaction::change_by_selection(&cx.view.doc.state, |range| {
-                let line_end = text.line_to_char(text.char_to_line(range.head) + 1);
-                (line_end, line_end, Some(values.next().unwrap()))
-            })
-        } else {
-            Transaction::change_by_selection(&cx.view.doc.state, |range| {
-                (range.head + 1, range.head + 1, Some(values.next().unwrap()))
-            })
-        };
-
-        cx.view.doc.apply(&transaction);
-        append_changes_to_history(cx);
-    }
-}
-
-fn get_lines(view: &View) -> Vec<usize> {
-    let mut lines = Vec::new();
-
-    // Get all line numbers
-    for range in view.doc.selection().ranges() {
-        let start = view.doc.text().char_to_line(range.from());
-        let end = view.doc.text().char_to_line(range.to());
-
-        for line in start..=end {
-            lines.push(line)
-        }
-    }
-    lines.sort_unstable(); // sorting by usize so _unstable is preferred
-    lines.dedup();
-    lines
-}
-
-pub fn indent(cx: &mut Context) {
-    let lines = get_lines(cx.view);
-
-    // Indent by one level
-    let indent = Tendril::from(" ".repeat(TAB_WIDTH));
-
-    let transaction = Transaction::change(
-        &cx.view.doc.state,
-        lines.into_iter().map(|line| {
-            let pos = cx.view.doc.text().line_to_char(line);
-            (pos, pos, Some(indent.clone()))
-        }),
-    );
-    cx.view.doc.apply(&transaction);
-    append_changes_to_history(cx);
-}
-
-pub fn unindent(cx: &mut Context) {
-    let lines = get_lines(cx.view);
-    let mut changes = Vec::with_capacity(lines.len());
-
-    for line_idx in lines {
-        let line = cx.view.doc.text().line(line_idx);
-        let mut width = 0;
-
-        for ch in line.chars() {
-            match ch {
-                ' ' => width += 1,
-                '\t' => width = (width / TAB_WIDTH + 1) * TAB_WIDTH,
-                _ => break,
-            }
-
-            if width >= TAB_WIDTH {
-                break;
-            }
-        }
-
-        if width > 0 {
-            let start = cx.view.doc.text().line_to_char(line_idx);
-            changes.push((start, start + width, None))
-        }
-    }
-
-    let transaction = Transaction::change(&cx.view.doc.state, changes.into_iter());
-
-    cx.view.doc.apply(&transaction);
-    append_changes_to_history(cx);
-}
-
-pub fn indent_selection(_cx: &mut Context) {
-    // loop over each line and recompute proper indentation
-    unimplemented!()
-}
-
-//
-
-pub fn save(cx: &mut Context) {
-    // Spawns an async task to actually do the saving. This way we prevent blocking.
-
-    // TODO: handle save errors somehow?
-    cx.executor.spawn(cx.view.doc.save()).detach();
-}
diff --git a/helix-view/src/keymap.rs b/helix-view/src/keymap.rs
deleted file mode 100644
index c815911e..00000000
--- a/helix-view/src/keymap.rs
+++ /dev/null
@@ -1,217 +0,0 @@
-use crate::commands::{self, Command};
-use crate::document::Mode;
-use helix_core::hashmap;
-use std::collections::HashMap;
-
-// Kakoune-inspired:
-// mode = {
-//      normal = {
-//          q = record_macro
-//          w = (next) word
-//          W = next WORD
-//          e = end of word
-//          E = end of WORD
-//          r =
-//          t = 'till char
-//          y = yank
-//          u = undo
-//          U = redo
-//          i = insert
-//          I = INSERT (start of line)
-//          o = open below (insert on new line below)
-//          O = open above (insert on new line above)
-//          p = paste (before cursor)
-//          P = PASTE (after cursor)
-//          ` =
-//          [ = select to text object start (alt = select whole object)
-//          ] = select to text object end
-//          { = extend to inner object start
-//          } = extend to inner object end
-//          a = append
-//          A = APPEND (end of line)
-//          s = split
-//          S = select
-//          d = delete()
-//          f = find_char()
-//          g = goto (gg, G, gc, gd, etc)
-//
-//          h = move_char_left(n)
-//          j = move_line_down(n)
-//          k = move_line_up(n)
-//          l = move_char_right(n)
-//          : = command line
-//          ; = collapse selection to cursor
-//          " = use register
-//          ` = convert case? (to lower) (alt = swap case)
-//          ~ = convert to upper case
-//          . = repeat last command
-//          \ = disable hook?
-//          / = search
-//          > = indent
-//          < = deindent
-//          % = select whole buffer (in vim = jump to matching bracket)
-//          * = search pattern in selection
-//          ( = rotate main selection backward
-//          ) = rotate main selection forward
-//          - = trim selections? (alt = merge contiguous sel together)
-//          @ = convert tabs to spaces
-//          & = align cursor
-//          ? = extend to next given regex match (alt = to prev)
-//
-//          in kakoune these are alt-h alt-l / gh gl
-//                              select from curs to begin end / move curs to begin end
-//          0 = start of line
-//          ^ = start of line (first non blank char)
-//          $ = end of line
-//
-//          z = save selections
-//          Z = restore selections
-//          x = select line
-//          X = extend line
-//          c = change selected text
-//          C = copy selection?
-//          v = view menu (viewport manipulation)
-//          b = select to previous word start
-//          B = select to previous WORD start
-//
-//
-//
-//
-//
-//
-//          = = align?
-//          + =
-//      }
-//
-//      gd = goto definition
-//      gr = goto reference
-// }
-
-#[cfg(feature = "term")]
-pub use crossterm::event::{KeyCode, KeyEvent as Key, KeyModifiers as Modifiers};
-
-// TODO: could be trie based
-pub type Keymap = HashMap<Vec<Key>, Command>;
-pub type Keymaps = HashMap<Mode, Keymap>;
-
-macro_rules! key {
-    ($ch:expr) => {
-        Key {
-            code: KeyCode::Char($ch),
-            modifiers: Modifiers::NONE,
-        }
-    };
-}
-
-macro_rules! shift {
-    ($ch:expr) => {
-        Key {
-            code: KeyCode::Char($ch),
-            modifiers: Modifiers::SHIFT,
-        }
-    };
-}
-
-macro_rules! ctrl {
-    ($ch:expr) => {
-        Key {
-            code: KeyCode::Char($ch),
-            modifiers: Modifiers::CONTROL,
-        }
-    };
-}
-
-// macro_rules! alt {
-//     ($ch:expr) => {
-//         Key {
-//             code: KeyCode::Char($ch),
-//             modifiers: Modifiers::ALT,
-//         }
-//     };
-// }
-
-pub fn default() -> Keymaps {
-    hashmap!(
-        Mode::Normal =>
-            // as long as you cast the first item, rust is able to infer the other cases
-            hashmap!(
-                vec![key!('h')] => commands::move_char_left as Command,
-                vec![key!('j')] => commands::move_line_down,
-                vec![key!('k')] => commands::move_line_up,
-                vec![key!('0')] => commands::move_line_start,
-                vec![key!('$')] => commands::move_line_end,
-                vec![key!('l')] => commands::move_char_right,
-                vec![shift!('H')] => commands::extend_char_left,
-                vec![shift!('J')] => commands::extend_line_down,
-                vec![shift!('K')] => commands::extend_line_up,
-                vec![shift!('L')] => commands::extend_char_right,
-                vec![key!('w')] => commands::move_next_word_start,
-                vec![key!('b')] => commands::move_prev_word_start,
-                vec![key!('e')] => commands::move_next_word_end,
-                vec![key!('g')] => commands::goto_mode,
-                vec![key!('i')] => commands::insert_mode,
-                vec![shift!('I')] => commands::prepend_to_line,
-                vec![key!('a')] => commands::append_mode,
-                vec![shift!('A')] => commands::append_to_line,
-                vec![key!('o')] => commands::open_below,
-                vec![key!('d')] => commands::delete_selection,
-                vec![key!('c')] => commands::change_selection,
-                vec![key!('s')] => commands::split_selection_on_newline,
-                vec![key!(';')] => commands::collapse_selection,
-                // TODO should be alt(;)
-                vec![key!('%')] => commands::flip_selections,
-                vec![key!('x')] => commands::select_line,
-                vec![key!('u')] => commands::undo,
-                vec![shift!('U')] => commands::redo,
-                vec![key!('y')] => commands::yank,
-                vec![key!('p')] => commands::paste,
-                vec![key!('>')] => commands::indent,
-                vec![key!('<')] => commands::unindent,
-                vec![key!(':')] => commands::command_mode,
-                vec![Key {
-                    code: KeyCode::Esc,
-                    modifiers: Modifiers::NONE
-                }] => commands::normal_mode,
-                vec![Key {
-                    code: KeyCode::PageUp,
-                    modifiers: Modifiers::NONE
-                }] => commands::page_up,
-                vec![Key {
-                    code: KeyCode::PageDown,
-                    modifiers: Modifiers::NONE
-                }] => commands::page_down,
-                vec![ctrl!('u')] => commands::half_page_up,
-                vec![ctrl!('d')] => commands::half_page_down,
-            ),
-            Mode::Insert => hashmap!(
-                vec![Key {
-                    code: KeyCode::Esc,
-                    modifiers: Modifiers::NONE
-                }] => commands::normal_mode as Command,
-                vec![Key {
-                    code: KeyCode::Backspace,
-                    modifiers: Modifiers::NONE
-                }] => commands::insert::delete_char_backward,
-                vec![Key {
-                    code: KeyCode::Delete,
-                    modifiers: Modifiers::NONE
-                }] => commands::insert::delete_char_forward,
-                vec![Key {
-                    code: KeyCode::Enter,
-                    modifiers: Modifiers::NONE
-                }] => commands::insert::insert_newline,
-                vec![Key {
-                    code: KeyCode::Tab,
-                    modifiers: Modifiers::NONE
-                }] => commands::insert::insert_tab,
-            ),
-            Mode::Goto => hashmap!(
-                vec![Key {
-                    code: KeyCode::Esc,
-                    modifiers: Modifiers::NONE
-                }] => commands::normal_mode as Command,
-                vec![key!('g')] => commands::move_file_start as Command,
-                vec![key!('e')] => commands::move_file_end as Command,
-            ),
-    )
-}
diff --git a/helix-view/src/lib.rs b/helix-view/src/lib.rs
index 3b923744..f28c8116 100644
--- a/helix-view/src/lib.rs
+++ b/helix-view/src/lib.rs
@@ -1,8 +1,5 @@
-pub mod commands;
 pub mod document;
 pub mod editor;
-pub mod keymap;
-pub mod prompt;
 pub mod theme;
 pub mod view;
 
diff --git a/helix-view/src/prompt.rs b/helix-view/src/prompt.rs
deleted file mode 100644
index e2a9c80d..00000000
--- a/helix-view/src/prompt.rs
+++ /dev/null
@@ -1,126 +0,0 @@
-use crate::Editor;
-use crossterm::event::{KeyCode, KeyEvent, KeyModifiers};
-use std::string::String;
-
-pub struct Prompt {
-    pub prompt: String,
-    pub line: String,
-    pub cursor: usize,
-    pub completion: Vec<String>,
-    pub should_close: bool,
-    pub completion_selection_index: Option<usize>,
-    completion_fn: Box<dyn FnMut(&str) -> Vec<String>>,
-    callback_fn: Box<dyn FnMut(&mut Editor, &str)>,
-}
-
-impl Prompt {
-    pub fn new(
-        prompt: String,
-        mut completion_fn: impl FnMut(&str) -> Vec<String> + 'static,
-        callback_fn: impl FnMut(&mut Editor, &str) + 'static,
-    ) -> Prompt {
-        Prompt {
-            prompt,
-            line: String::new(),
-            cursor: 0,
-            completion: completion_fn(""),
-            should_close: false,
-            completion_selection_index: None,
-            completion_fn: Box::new(completion_fn),
-            callback_fn: Box::new(callback_fn),
-        }
-    }
-
-    pub fn insert_char(&mut self, c: char) {
-        self.line.insert(self.cursor, c);
-        self.cursor += 1;
-        self.completion = (self.completion_fn)(&self.line);
-        self.exit_selection();
-    }
-
-    pub fn move_char_left(&mut self) {
-        if self.cursor > 0 {
-            self.cursor -= 1;
-        }
-    }
-
-    pub fn move_char_right(&mut self) {
-        if self.cursor < self.line.len() {
-            self.cursor += 1;
-        }
-    }
-
-    pub fn move_start(&mut self) {
-        self.cursor = 0;
-    }
-
-    pub fn move_end(&mut self) {
-        self.cursor = self.line.len();
-    }
-
-    pub fn delete_char_backwards(&mut self) {
-        if self.cursor > 0 {
-            self.line.remove(self.cursor - 1);
-            self.cursor -= 1;
-            self.completion = (self.completion_fn)(&self.line);
-        }
-        self.exit_selection();
-    }
-
-    pub fn change_completion_selection(&mut self) {
-        if self.completion.is_empty() {
-            return;
-        }
-        let index =
-            self.completion_selection_index.map(|i| i + 1).unwrap_or(0) % self.completion.len();
-        self.completion_selection_index = Some(index);
-        self.line = self.completion[index].clone();
-    }
-    pub fn exit_selection(&mut self) {
-        self.completion_selection_index = None;
-    }
-
-    pub fn handle_input(&mut self, key_event: KeyEvent, editor: &mut Editor) {
-        match key_event {
-            KeyEvent {
-                code: KeyCode::Char(c),
-                modifiers: KeyModifiers::NONE,
-            } => self.insert_char(c),
-            KeyEvent {
-                code: KeyCode::Esc, ..
-            } => self.should_close = true,
-            KeyEvent {
-                code: KeyCode::Right,
-                ..
-            } => self.move_char_right(),
-            KeyEvent {
-                code: KeyCode::Left,
-                ..
-            } => self.move_char_left(),
-            KeyEvent {
-                code: KeyCode::Char('e'),
-                modifiers: KeyModifiers::CONTROL,
-            } => self.move_end(),
-            KeyEvent {
-                code: KeyCode::Char('a'),
-                modifiers: KeyModifiers::CONTROL,
-            } => self.move_start(),
-            KeyEvent {
-                code: KeyCode::Backspace,
-                modifiers: KeyModifiers::NONE,
-            } => self.delete_char_backwards(),
-            KeyEvent {
-                code: KeyCode::Enter,
-                ..
-            } => (self.callback_fn)(editor, &self.line),
-            KeyEvent {
-                code: KeyCode::Tab, ..
-            } => self.change_completion_selection(),
-            KeyEvent {
-                code: KeyCode::Char('q'),
-                modifiers: KeyModifiers::CONTROL,
-            } => self.exit_selection(),
-            _ => (),
-        }
-    }
-}