1 files changed, 0 insertions, 680 deletions
diff --git a/helix-view/src/commands.rs b/helix-view/src/commands.rs
deleted file mode 100644
index c135a3da..00000000
--- a/helix-view/src/commands.rs
+++ /dev/null
@@ -1,680 +0,0 @@
-use helix_core::{
-    graphemes,
-    indent::TAB_WIDTH,
-    regex::Regex,
-    register, selection,
-    state::{Direction, Granularity, State},
-    ChangeSet, Range, Selection, Tendril, Transaction,
-};
-use once_cell::sync::Lazy;
-
-use crate::{
-    document::Mode,
-    prompt::Prompt,
-    view::{View, PADDING},
-};
-
-pub struct Context<'a, 'b> {
-    pub count: usize,
-    pub view: &'a mut View,
-    pub executor: &'a smol::Executor<'b>,
-}
-
-/// A command is a function that takes the current state and a count, and does a side-effect on the
-/// state (usually by creating and applying a transaction).
-pub type Command = fn(cx: &mut Context);
-
-pub fn move_char_left(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .move_selection(Direction::Backward, Granularity::Character, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn move_char_right(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .move_selection(Direction::Forward, Granularity::Character, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn move_line_up(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .move_selection(Direction::Backward, Granularity::Line, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn move_line_down(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .move_selection(Direction::Forward, Granularity::Line, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn move_line_end(cx: &mut Context) {
-    let lines = selection_lines(&cx.view.doc.state);
-
-    let positions = lines
-        .into_iter()
-        .map(|index| {
-            // adjust all positions to the end of the line.
-
-            // Line end is pos at the start of next line - 1
-            // subtract another 1 because the line ends with \n
-            cx.view.doc.text().line_to_char(index + 1).saturating_sub(2)
-        })
-        .map(|pos| Range::new(pos, pos));
-
-    let selection = Selection::new(positions.collect(), 0);
-
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn move_line_start(cx: &mut Context) {
-    let lines = selection_lines(&cx.view.doc.state);
-
-    let positions = lines
-        .into_iter()
-        .map(|index| {
-            // adjust all positions to the start of the line.
-            cx.view.doc.text().line_to_char(index)
-        })
-        .map(|pos| Range::new(pos, pos));
-
-    let selection = Selection::new(positions.collect(), 0);
-
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn move_next_word_start(cx: &mut Context) {
-    let pos = cx.view.doc.state.move_pos(
-        cx.view.doc.selection().cursor(),
-        Direction::Forward,
-        Granularity::Word,
-        cx.count,
-    );
-
-    cx.view.doc.set_selection(Selection::point(pos));
-}
-
-pub fn move_prev_word_start(cx: &mut Context) {
-    let pos = cx.view.doc.state.move_pos(
-        cx.view.doc.selection().cursor(),
-        Direction::Backward,
-        Granularity::Word,
-        cx.count,
-    );
-
-    cx.view.doc.set_selection(Selection::point(pos));
-}
-
-pub fn move_next_word_end(cx: &mut Context) {
-    let pos = State::move_next_word_end(
-        &cx.view.doc.text().slice(..),
-        cx.view.doc.selection().cursor(),
-        cx.count,
-    );
-
-    cx.view.doc.set_selection(Selection::point(pos));
-}
-
-pub fn move_file_start(cx: &mut Context) {
-    cx.view.doc.set_selection(Selection::point(0));
-
-    cx.view.doc.mode = Mode::Normal;
-}
-
-pub fn move_file_end(cx: &mut Context) {
-    let text = &cx.view.doc.text();
-    let last_line = text.line_to_char(text.len_lines().saturating_sub(2));
-    cx.view.doc.set_selection(Selection::point(last_line));
-
-    cx.view.doc.mode = Mode::Normal;
-}
-
-pub fn check_cursor_in_view(view: &View) -> bool {
-    let cursor = view.doc.selection().cursor();
-    let line = view.doc.text().char_to_line(cursor);
-    let document_end = view.first_line + view.size.1.saturating_sub(1) as usize;
-
-    if (line > document_end.saturating_sub(PADDING)) | (line < view.first_line + PADDING) {
-        return false;
-    }
-    true
-}
-
-pub fn page_up(cx: &mut Context) {
-    if cx.view.first_line < PADDING {
-        return;
-    }
-
-    cx.view.first_line = cx.view.first_line.saturating_sub(cx.view.size.1 as usize);
-
-    if !check_cursor_in_view(cx.view) {
-        let text = cx.view.doc.text();
-        let pos = text.line_to_char(cx.view.last_line().saturating_sub(PADDING));
-        cx.view.doc.set_selection(Selection::point(pos));
-    }
-}
-
-pub fn page_down(cx: &mut Context) {
-    cx.view.first_line += cx.view.size.1 as usize + PADDING;
-
-    if cx.view.first_line < cx.view.doc.text().len_lines() {
-        let text = cx.view.doc.text();
-        let pos = text.line_to_char(cx.view.first_line as usize);
-        cx.view.doc.set_selection(Selection::point(pos));
-    }
-}
-
-pub fn half_page_up(cx: &mut Context) {
-    if cx.view.first_line < PADDING {
-        return;
-    }
-
-    cx.view.first_line = cx
-        .view
-        .first_line
-        .saturating_sub(cx.view.size.1 as usize / 2);
-
-    if !check_cursor_in_view(cx.view) {
-        let text = &cx.view.doc.text();
-        let pos = text.line_to_char(cx.view.last_line() - PADDING);
-        cx.view.doc.set_selection(Selection::point(pos));
-    }
-}
-
-pub fn half_page_down(cx: &mut Context) {
-    let lines = cx.view.doc.text().len_lines();
-    if cx.view.first_line < lines.saturating_sub(cx.view.size.1 as usize) {
-        cx.view.first_line += cx.view.size.1 as usize / 2;
-    }
-    if !check_cursor_in_view(cx.view) {
-        let text = cx.view.doc.text();
-        let pos = text.line_to_char(cx.view.first_line as usize);
-        cx.view.doc.set_selection(Selection::point(pos));
-    }
-}
-// avoid select by default by having a visual mode switch that makes movements into selects
-
-pub fn extend_char_left(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .extend_selection(Direction::Backward, Granularity::Character, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn extend_char_right(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .extend_selection(Direction::Forward, Granularity::Character, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn extend_line_up(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .extend_selection(Direction::Backward, Granularity::Line, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn extend_line_down(cx: &mut Context) {
-    let selection =
-        cx.view
-            .doc
-            .state
-            .extend_selection(Direction::Forward, Granularity::Line, cx.count);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn split_selection_on_newline(cx: &mut Context) {
-    let text = &cx.view.doc.text().slice(..);
-    // only compile the regex once
-    #[allow(clippy::trivial_regex)]
-    static REGEX: Lazy<Regex> = Lazy::new(|| Regex::new(r"\n").unwrap());
-    let selection = selection::split_on_matches(text, cx.view.doc.selection(), &REGEX);
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn select_line(cx: &mut Context) {
-    // TODO: count
-    let pos = cx.view.doc.selection().primary();
-    let text = cx.view.doc.text();
-    let line = text.char_to_line(pos.head);
-    let start = text.line_to_char(line);
-    let end = text.line_to_char(line + 1).saturating_sub(1);
-
-    cx.view.doc.set_selection(Selection::single(start, end));
-}
-
-pub fn delete_selection(cx: &mut Context) {
-    let transaction = Transaction::change_by_selection(&cx.view.doc.state, |range| {
-        (range.from(), range.to() + 1, None)
-    });
-    cx.view.doc.apply(&transaction);
-
-    append_changes_to_history(cx);
-}
-
-pub fn change_selection(cx: &mut Context) {
-    delete_selection(cx);
-    insert_mode(cx);
-}
-
-pub fn collapse_selection(cx: &mut Context) {
-    let selection = cx
-        .view
-        .doc
-        .selection()
-        .transform(|range| Range::new(range.head, range.head));
-
-    cx.view.doc.set_selection(selection);
-}
-
-pub fn flip_selections(cx: &mut Context) {
-    let selection = cx
-        .view
-        .doc
-        .selection()
-        .transform(|range| Range::new(range.head, range.anchor));
-
-    cx.view.doc.set_selection(selection);
-}
-
-fn enter_insert_mode(cx: &mut Context) {
-    cx.view.doc.mode = Mode::Insert;
-
-    append_changes_to_history(cx);
-}
-// inserts at the start of each selection
-pub fn insert_mode(cx: &mut Context) {
-    enter_insert_mode(cx);
-
-    let selection = cx
-        .view
-        .doc
-        .selection()
-        .transform(|range| Range::new(range.to(), range.from()));
-    cx.view.doc.set_selection(selection);
-}
-
-// inserts at the end of each selection
-pub fn append_mode(cx: &mut Context) {
-    enter_insert_mode(cx);
-    cx.view.doc.restore_cursor = true;
-
-    // TODO: as transaction
-    let text = &cx.view.doc.text().slice(..);
-    let selection = cx.view.doc.selection().transform(|range| {
-        // TODO: to() + next char
-        Range::new(
-            range.from(),
-            graphemes::next_grapheme_boundary(text, range.to()),
-        )
-    });
-    cx.view.doc.set_selection(selection);
-}
-
-// TODO: I, A, o and O can share a lot of the primitives.
-pub fn command_mode(_cx: &mut Context) {
-    unimplemented!()
-}
-
-// calculate line numbers for each selection range
-fn selection_lines(state: &State) -> Vec<usize> {
-    let mut lines = state
-        .selection
-        .ranges()
-        .iter()
-        .map(|range| state.doc.char_to_line(range.head))
-        .collect::<Vec<_>>();
-
-    lines.sort_unstable(); // sorting by usize so _unstable is preferred
-    lines.dedup();
-
-    lines
-}
-
-// I inserts at the start of each line with a selection
-pub fn prepend_to_line(cx: &mut Context) {
-    enter_insert_mode(cx);
-
-    move_line_start(cx);
-}
-
-// A inserts at the end of each line with a selection
-pub fn append_to_line(cx: &mut Context) {
-    enter_insert_mode(cx);
-
-    move_line_end(cx);
-}
-
-// o inserts a new line after each line with a selection
-pub fn open_below(cx: &mut Context) {
-    enter_insert_mode(cx);
-
-    let lines = selection_lines(&cx.view.doc.state);
-
-    let positions: Vec<_> = lines
-        .into_iter()
-        .map(|index| {
-            // adjust all positions to the end of the line/start of the next one.
-            cx.view.doc.text().line_to_char(index + 1)
-        })
-        .collect();
-
-    // TODO: use same logic as insert_newline for indentation
-    let changes = positions.iter().copied().map(|index|
-        // generate changes
-        (index, index, Some(Tendril::from_char('\n'))));
-
-    // TODO: count actually inserts "n" new lines and starts editing on all of them.
-    // TODO: append "count" newlines and modify cursors to those lines
-
-    let selection = Selection::new(
-        positions
-            .iter()
-            .copied()
-            .map(|pos| Range::new(pos, pos))
-            .collect(),
-        0,
-    );
-
-    let transaction = Transaction::change(&cx.view.doc.state, changes).with_selection(selection);
-
-    cx.view.doc.apply(&transaction);
-}
-
-// O inserts a new line before each line with a selection
-
-fn append_changes_to_history(cx: &mut Context) {
-    if cx.view.doc.changes.is_empty() {
-        return;
-    }
-
-    let new_changeset = ChangeSet::new(cx.view.doc.text());
-    let changes = std::mem::replace(&mut cx.view.doc.changes, new_changeset);
-    // Instead of doing this messy merge we could always commit, and based on transaction
-    // annotations either add a new layer or compose into the previous one.
-    let transaction = Transaction::from(changes).with_selection(cx.view.doc.selection().clone());
-
-    // increment document version
-    // TODO: needs to happen on undo/redo too
-    cx.view.doc.version += 1;
-
-    // TODO: trigger lsp/documentDidChange with changes
-
-    // HAXX: we need to reconstruct the state as it was before the changes..
-    let old_state = std::mem::replace(&mut cx.view.doc.old_state, cx.view.doc.state.clone());
-    // TODO: take transaction by value?
-    cx.view
-        .doc
-        .history
-        .commit_revision(&transaction, &old_state);
-
-    // TODO: notify LSP of changes
-}
-
-pub fn normal_mode(cx: &mut Context) {
-    cx.view.doc.mode = Mode::Normal;
-
-    append_changes_to_history(cx);
-
-    // if leaving append mode, move cursor back by 1
-    if cx.view.doc.restore_cursor {
-        let text = &cx.view.doc.text().slice(..);
-        let selection = cx.view.doc.selection().transform(|range| {
-            Range::new(
-                range.from(),
-                graphemes::prev_grapheme_boundary(text, range.to()),
-            )
-        });
-        cx.view.doc.set_selection(selection);
-
-        cx.view.doc.restore_cursor = false;
-    }
-}
-
-pub fn goto_mode(cx: &mut Context) {
-    cx.view.doc.mode = Mode::Goto;
-}
-
-// NOTE: Transactions in this module get appended to history when we switch back to normal mode.
-pub mod insert {
-    use super::*;
-    // TODO: insert means add text just before cursor, on exit we should be on the last letter.
-    pub fn insert_char(cx: &mut Context, c: char) {
-        let c = Tendril::from_char(c);
-        let transaction = Transaction::insert(&cx.view.doc.state, c);
-
-        cx.view.doc.apply(&transaction);
-    }
-
-    pub fn insert_tab(cx: &mut Context) {
-        insert_char(cx, '\t');
-    }
-
-    pub fn insert_newline(cx: &mut Context) {
-        let transaction = Transaction::change_by_selection(&cx.view.doc.state, |range| {
-            let indent_level = helix_core::indent::suggested_indent_for_pos(
-                cx.view.doc.syntax.as_ref(),
-                &cx.view.doc.state,
-                range.head,
-            );
-            let indent = " ".repeat(TAB_WIDTH).repeat(indent_level);
-            let mut text = String::with_capacity(1 + indent.len());
-            text.push('\n');
-            text.push_str(&indent);
-            (range.head, range.head, Some(text.into()))
-        });
-        cx.view.doc.apply(&transaction);
-    }
-
-    // TODO: handle indent-aware delete
-    pub fn delete_char_backward(cx: &mut Context) {
-        let text = &cx.view.doc.text().slice(..);
-        let transaction = Transaction::change_by_selection(&cx.view.doc.state, |range| {
-            (
-                graphemes::nth_prev_grapheme_boundary(text, range.head, cx.count),
-                range.head,
-                None,
-            )
-        });
-        cx.view.doc.apply(&transaction);
-    }
-
-    pub fn delete_char_forward(cx: &mut Context) {
-        let text = &cx.view.doc.text().slice(..);
-        let transaction = Transaction::change_by_selection(&cx.view.doc.state, |range| {
-            (
-                range.head,
-                graphemes::nth_next_grapheme_boundary(text, range.head, cx.count),
-                None,
-            )
-        });
-        cx.view.doc.apply(&transaction);
-    }
-}
-
-pub fn insert_char_prompt(prompt: &mut Prompt, c: char) {
-    prompt.insert_char(c);
-}
-
-// Undo / Redo
-
-pub fn undo(cx: &mut Context) {
-    if let Some(revert) = cx.view.doc.history.undo() {
-        cx.view.doc.version += 1;
-        cx.view.doc.apply(&revert);
-    }
-
-    // TODO: each command could simply return a Option<transaction>, then the higher level handles storing it?
-}
-
-pub fn redo(cx: &mut Context) {
-    if let Some(transaction) = cx.view.doc.history.redo() {
-        cx.view.doc.version += 1;
-        cx.view.doc.apply(&transaction);
-    }
-}
-
-// Yank / Paste
-
-pub fn yank(cx: &mut Context) {
-    // TODO: should selections be made end inclusive?
-    let values = cx
-        .view
-        .doc
-        .state
-        .selection()
-        .fragments(&cx.view.doc.text().slice(..))
-        .map(|cow| cow.into_owned())
-        .collect();
-
-    // TODO: allow specifying reg
-    let reg = '"';
-    register::set(reg, values);
-}
-
-pub fn paste(cx: &mut Context) {
-    // TODO: allow specifying reg
-    let reg = '"';
-    if let Some(values) = register::get(reg) {
-        let repeat = std::iter::repeat(
-            values
-                .last()
-                .map(|value| Tendril::from_slice(value))
-                .unwrap(),
-        );
-
-        // TODO: if any of values ends \n it's linewise paste
-        //
-        // p => paste after
-        // P => paste before
-        // alt-p => paste every yanked selection after selected text
-        // alt-P => paste every yanked selection before selected text
-        // R => replace selected text with yanked text
-        // alt-R => replace selected text with every yanked text
-        //
-        // append => insert at next line
-        // insert => insert at start of line
-        // replace => replace
-        // default insert
-
-        let linewise = values.iter().any(|value| value.ends_with('\n'));
-
-        let mut values = values.into_iter().map(Tendril::from).chain(repeat);
-
-        let transaction = if linewise {
-            // paste on the next line
-            // TODO: can simply take a range + modifier and compute the right pos without ifs
-            let text = cx.view.doc.text();
-            Transaction::change_by_selection(&cx.view.doc.state, |range| {
-                let line_end = text.line_to_char(text.char_to_line(range.head) + 1);
-                (line_end, line_end, Some(values.next().unwrap()))
-            })
-        } else {
-            Transaction::change_by_selection(&cx.view.doc.state, |range| {
-                (range.head + 1, range.head + 1, Some(values.next().unwrap()))
-            })
-        };
-
-        cx.view.doc.apply(&transaction);
-        append_changes_to_history(cx);
-    }
-}
-
-fn get_lines(view: &View) -> Vec<usize> {
-    let mut lines = Vec::new();
-
-    // Get all line numbers
-    for range in view.doc.selection().ranges() {
-        let start = view.doc.text().char_to_line(range.from());
-        let end = view.doc.text().char_to_line(range.to());
-
-        for line in start..=end {
-            lines.push(line)
-        }
-    }
-    lines.sort_unstable(); // sorting by usize so _unstable is preferred
-    lines.dedup();
-    lines
-}
-
-pub fn indent(cx: &mut Context) {
-    let lines = get_lines(cx.view);
-
-    // Indent by one level
-    let indent = Tendril::from(" ".repeat(TAB_WIDTH));
-
-    let transaction = Transaction::change(
-        &cx.view.doc.state,
-        lines.into_iter().map(|line| {
-            let pos = cx.view.doc.text().line_to_char(line);
-            (pos, pos, Some(indent.clone()))
-        }),
-    );
-    cx.view.doc.apply(&transaction);
-    append_changes_to_history(cx);
-}
-
-pub fn unindent(cx: &mut Context) {
-    let lines = get_lines(cx.view);
-    let mut changes = Vec::with_capacity(lines.len());
-
-    for line_idx in lines {
-        let line = cx.view.doc.text().line(line_idx);
-        let mut width = 0;
-
-        for ch in line.chars() {
-            match ch {
-                ' ' => width += 1,
-                '\t' => width = (width / TAB_WIDTH + 1) * TAB_WIDTH,
-                _ => break,
-            }
-
-            if width >= TAB_WIDTH {
-                break;
-            }
-        }
-
-        if width > 0 {
-            let start = cx.view.doc.text().line_to_char(line_idx);
-            changes.push((start, start + width, None))
-        }
-    }
-
-    let transaction = Transaction::change(&cx.view.doc.state, changes.into_iter());
-
-    cx.view.doc.apply(&transaction);
-    append_changes_to_history(cx);
-}
-
-pub fn indent_selection(_cx: &mut Context) {
-    // loop over each line and recompute proper indentation
-    unimplemented!()
-}
-
-//
-
-pub fn save(cx: &mut Context) {
-    // Spawns an async task to actually do the saving. This way we prevent blocking.
-
-    // TODO: handle save errors somehow?
-    cx.executor.spawn(cx.view.doc.save()).detach();
-}