| Commit message (Collapse) | Author | Age |
|---|
| | |
|
| |
|
|
| |
This theme is an adaptation of
github.com/EdenEast/nightfox.nvim
|
| |
|
|
|
|
| |
This matches the insert-mode behavior for Vim and Kakoune: if the
current line is empty except for whitespace, `<ret>` should insert a
line ending at the beginning of the line, moving any indentation to the
next line.
|
| |
|
|
|
|
|
|
|
| |
This prevents a freeze while shutting down when using `efm-langserver`.
`efm-langserver` exits immediately after seeing a shutdown request,
without responding to the request. We block awaiting the reply to the
shutdown request which will never come, so we time out.
This change responds to any pending requests with `Err` saying that the
stream has been closed.
|
| | |
|
| |
|
|
|
|
|
| |
This update includes a handful of fixes, a new binary concatenation
operator (already highlighted by the `binary_operator` rule), and a
new `use` language construct. The nodes are backwards compatible but
this update introduces two new nodes for highlighting: `use` and `<-`.
|
| |
|
|
|
| |
tree-sitter-heex split out the ending_expression_value from the
partial_expression value which can help with indentation.
|
| |
|
|
|
|
|
| |
This doesn't work robustly (within pattern matches). Only regular
bindings are highlighted as parameters. In order to highlight all
parameters even in matches, we would need an arbitrary nesting operator
in queries which doesn't exist yet in tree-sitter.
|
| |
|
|
|
|
| |
This highlights edoc within Erlang comments. The trick was to have
the Erlang grammar consume newlines and then give them to EDoc in the
injection to use so that line-wise elements could be parsed accurately.
|
| |
|
|
|
|
| |
The 'revisions' field on History can't be treated as linear: each
Revision in the revisions Vec has a parent link and an optional child
link. We can follow those to unroll the recent history.
|
| |
|
|
|
|
|
|
| |
When using undo/redo, the history revision can be decremented. In that
case we should apply the inversions since the given revision in
History::changes_since. This prevents panics with jumplist operations
when a session uses undo/redo to move the jumplist selection outside
of the document.
|
| |
|
|
|
|
| |
View::apply should only be called by EditorView after
42e37a571e75aaf4feb1717dfebe8cf215e535dd. This change removes the
duplicate calls within undo/redo which could cause a panic.
|
| |
|
|
|
|
|
| |
This case panics since undo/redo call View::apply and here, the edit
that moves the jumplist selection out-of-bounds is not yet applied when
View::apply is called in undo/redo. View::apply should only be called
by the EditorView now.
|
| | |
|
| |
|
| |
Fixes https://github.com/helix-editor/helix/issues/2771
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Add a test case for updating jumplists across windows
* Apply transactions to all views on history changes
This ensures that jumplist selections follow changes in documents, even
when there are multiple views (for example a split where both windows
edit the same document).
* Leave TODOs for cleaning up View::apply
* Use Iterator::reduce to compose history transactions
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Bumps [tokio](https://github.com/tokio-rs/tokio) from 1.21.2 to 1.22.0.
- [Release notes](https://github.com/tokio-rs/tokio/releases)
- [Commits](https://github.com/tokio-rs/tokio/compare/tokio-1.21.2...tokio-1.22.0)
---
updated-dependencies:
- dependency-name: tokio
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Bumps [Swatinem/rust-cache](https://github.com/Swatinem/rust-cache) from 1 to 2.
- [Release notes](https://github.com/Swatinem/rust-cache/releases)
- [Changelog](https://github.com/Swatinem/rust-cache/blob/master/CHANGELOG.md)
- [Commits](https://github.com/Swatinem/rust-cache/compare/v1...v2)
---
updated-dependencies:
- dependency-name: Swatinem/rust-cache
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
| |
* significantly improve treesitter performance while editing large files
* Apply stylistic suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* use PartialEq and Hash instead of a freestanding function
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Language Servers may signal that they do not support a method in
the initialization result (server capabilities). We can check these
when making LSP requests and hint in the status line when a method
is not supported by the server. This can also prevent crashes in
servers which assume that clients do not send requests for methods
which are disabled in the server capabilities.
There is an existing pattern the LSP client module where a method
returns `Option<impl Future<Output = Result<_>>>` with `None` signaling
no support in the server. This change extends this pattern to the rest
of the client functions. And we log an error to the statusline for
manually triggered LSP calls which return `None`.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, jumplists could grow unchecked. Every transaction is
applied to jumplist selections to ensure that they are up to date
and within document bounds, so this would cause every edit to become
more expensive as jumplist lengths increased throughout a session.
Setting a maximum number of entries limits the cost.
Vim and Neovim limit their jumplists:
* https://github.com/vim/vim/blob/b298fe6cbae3b240b10dbd55d9c38d0cc8e033d3/src/structs.h#L141
* https://github.com/neovim/neovim/blob/e8cc489accc435076afb4fdf89778b64f0a48473/src/nvim/mark_defs.h#L57
Notably, Kakoune does not. In Kakoune, changes are applied to jumplist
entries lazily as you hit `<C-o>`/`<C-i>` though, so Kakoune doesn't
have the same growing cost concerns. Kakoune also does not have a
concept of a View which limits the cost further.
Vim and Neovim limit to 100. This seems unreasonably high to me so I've
set this to 30 to start. We can increase if this is problematically
low.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Bumps [cc](https://github.com/rust-lang/cc-rs) from 1.0.76 to 1.0.77.
- [Release notes](https://github.com/rust-lang/cc-rs/releases)
- [Commits](https://github.com/rust-lang/cc-rs/compare/1.0.76...1.0.77)
---
updated-dependencies:
- dependency-name: cc
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Bumps [serde_json](https://github.com/serde-rs/json) from 1.0.87 to 1.0.88.
- [Release notes](https://github.com/serde-rs/json/releases)
- [Commits](https://github.com/serde-rs/json/compare/v1.0.87...v1.0.88)
---
updated-dependencies:
- dependency-name: serde_json
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
|
| |
|
|
| |
inputs (#4834)
|
| |
|
|
|
| |
The limit of 64 breaks some highlighting in Erlang files with
complicated record definitions. Bumping to 256 seems to work on all
files I have seen.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
d6323b7cbc21a9d3ba29738c76581dad93f9f415 changed the behavior of paste
to select the newly inserted text. This is preferrable in normal mode
because it's useful to be able to act on the new text. This behavior
is worse for insert or select mode though:
* In insert mode, the cursor ends up on the last character of the newly
selected text, so further typing inserts text before the last
character.
* In select mode, the current selection is replaced with the new text
selection which doesn't extend the current selection. With this
change, the selection is extended to include the new text.
This aligns the behavior more closely with Kakoune, but it's
coincidental instead of intentional: Kakoune doesn't implement
bracketed paste (AFAIK) which causes this behavior in insert mode,
and Kakoune doesn't have a select mode.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
| |
Previously, commands such as `r<tab>` (replace with tab) or `t<tab>`
(select till tab) had no effect. This is because `KeyCode::Tab` needs
special treatment (like `KeyCode::Enter`).
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This change handles a language server exiting. This was a UX sore-spot:
if a language server crashed, Helix did not recognize the exit and
continued to send requests to it. All requests would timeout since they
would not receive responses. This would also hold-up Helix closing
itself down since it would try to gracefully shutdown the server which
is implemented in the LSP spec as a request.
We could attempt to automatically restart the language server on crash.
I left this for future work since that change will need to be slightly
complicated: it will need to cover the case of a language server
repeatedly crashing.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
d7d0d5ffb79b6f2e09c6ab8af6e112c41e6f73e8 resolves completion items on
the idle-timeout event. The `Completion::resolve_completion_item`
function blocks on the LSP request though, which blocks the compositor
and in turn blocks the event loop. So until the language server returns
the resolved completion item, Helix is unable to respond to keypresses
or other LSP messages.
This is typically ok since the resolution request is fast but for some
language servers this can be problematic, and ideally we shouldn't be
blocking like this anyways.
When receiving a `completionItem/resolve` request, the Volar server
sends a `workspace/configuration` request to Helix and blocks itself
on the response, leading to a deadlock. Eventually the resolve request
times out within Helix but Helix is locked up and unresponsive in that
window.
This change resolves the completion item without blocking the
compositor.
|
| |
|
| |
Haskell source files are now either `.hs` (as before) or `.hs-boot`, which is a type of Haskell file that only contains type declarations (https://downloads.haskell.org/ghc/latest/docs/users_guide/separate_compilation.html#how-to-compile-mutually-recursive-modules)
|
| | |
|
| | |
|
| |
|
| |
Co-authored-by: Austen Adler <agadler@austenadler.com>
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
| |
PR #4134 switched the autocomplete menu from alphabetical to fuzzy
sorting. This commit removes the still existing filtering by prefix and
should enable full fuzzy sorting of the autocomplete menu.
closes #3084, #1807
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
|
| |
|
|
| |
when `truncate_start` is `true`, the `x_offset` is now properly updated
according to the width of the content or the truncated length.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The current `:tree-sitter-subtree` has a bug for field-names when the
field name belongs to an unnamed child node. Take this ruby example:
def self.method_name
true
end
The subtree given by tree-sitter-cli is:
(singleton_method [2, 0] - [4, 3]
object: (self [2, 4] - [2, 8])
name: (identifier [2, 9] - [2, 20])
body: (body_statement [3, 2] - [3, 6]
(true [3, 2] - [3, 6])))
But the `:tree-sitter-subtree` output was
(singleton_method
object: (self)
body: (identifier)
(body_statement (true)))
The `singleton_method` rule defines the `name` and `body` fields in an
unnamed helper rule `_method_rest` and the old implementation of
`pretty_print_tree_impl` would pass the `field_name` down from the
named `singleton_method` node.
To fix it we switch to the [TreeCursor] API which is recommended by
the tree-sitter docs for traversing the tree. `TreeCursor::field_name`
accurately determines the field name for the current cursor position
even when the node is unnamed.
[TreeCursor]: https://docs.rs/tree-sitter/0.20.9/tree_sitter/struct.TreeCursor.html
|
