aboutsummaryrefslogtreecommitdiff
path: root/helix-term/src/commands
Commit message (Collapse)AuthorAge
...
* Add command for resetting diff hunks (#5736)Pascal Kuthe2023-03-08
|
* Allow LSP server to be stopped (#5964)Davide Galassi2023-03-08
|
* feat(dap): implement Restart request (#5651)Filip Dutescu2023-03-06
| | | | | | | | | | | | | | | Add a restart debug session command, which would issue a [Restart Request][1], if the debugger supports it and a session is running. It uses the same arguments and requests used to start the initial session, when recreating it. It builds upon #5532, making use of the changes to the termination workflow of a session. [1]: https://microsoft.github.io/debug-adapter-protocol/specification#Requests_Restart Closes: #5594 Signed-off-by: Filip Dutescu <filip.dutescu@gmail.com>
* fix(dap): validate key and index exist when requesting vars (#5628)Filip Dutescu2023-02-20
| | | | | | | | | | Check if the stack frames contain the thread id and the frame before trying to get the frame id. If case any of the two fails to be found, provide the user with messages to inform them of the issue and gracefully return. Closes: #5625 Signed-off-by: Filip Dutescu <filip.dutescu@gmail.com>
* feat(dap): send Disconnect if Terminated event received (#5532)Filip Dutescu2023-02-20
| | | | | | | | | | | | | | | | | | | | | | | | | | Send a `Disconnect` DAP request if the `Terminated` event is received. According to the specification, if the debugging session was started by as `launch`, the debuggee should be terminated alongside the session. If instead the session was started as `attach`, it should not be disposed of. This default behaviour can be overriden if the `supportTerminateDebuggee` capability is supported by the adapter, through the `Disconnect` request `terminateDebuggee` argument, as described in [the specification][discon-spec]. This also implies saving the starting command for a debug sessions, in order to decide which behaviour should be used, as well as validating the capabilities of the adapter, in order to decide what the disconnect should do. An additional change made is handling of the `Exited` event, showing a message if the exit code is different than `0`, for the user to be aware off the termination failure. [discon-spec]: https://microsoft.github.io/debug-adapter-protocol/specification#Requests_Disconnect Closes: #4674 Signed-off-by: Filip Dutescu <filip.dutescu@gmail.com>
* feat: show current language when no argument is provided (#5895)Guillaume2023-02-16
|
* fix: decode lsp url for workspace_diagnostics_picker (#6016)Erasin2023-02-16
|
* Add :toggle-option command (#4085)A-Walrus2023-02-13
| | | This command toggles the value of boolean options
* Negotiate LSP Position Encoding (#5894)Pascal Kuthe2023-02-11
| | | | | | | So far LSP always required that `PositionEncoding.characters` is an UTF-16 offset. Now that LSP 3.17 is available in `lsp-types` request the server to send char offsets (UTF-32) or byte offsets (UTF-8) instead. For compatability with old servers, UTF-16 remains as the fallback as required by the standard.
* Address new clippy lintsBlaž Hrastnik2023-02-09
|
* Add :character-info command (#4000)William Etheredge2023-02-03
|
* always commit to history when pasting (#5790)Pascal Kuthe2023-02-02
|
* Support goto-declaration LSP command (#5646)Ole Krüger2023-01-31
|
* Use filename completer on run-shell-command (#5729)Jonathan LEI2023-01-30
|
* Remove apply_transaction helper (#5598)Ivan Tham2023-01-21
|
* Replace menu::Item::{row, label} with format()Gokul Soumya2023-01-18
|
* Fix language config reload logic (#5381)Ethan Kiang2023-01-03
|
* Expand `~` when parsing file paths in `:open` (#5329)iobtl2022-12-29
|
* Fix opening new files (#5278)alois312022-12-24
| | | | | | | Commit 1b89d3e5350f83b2ffb86a86326bd2714308ee53 introduced a regression where opening a new file would no longer work, because attempting to canonicalize its path would lead to a "No such file or directory" error. Fall back to opening a new file when encountering an error to fix this case.
* Add file picker dialogue when opening a directory with :o (#2707)Jack Allison2022-12-23
|
* Remove redraw to fix buildBlaž Hrastnik2022-12-15
|
* add redraw command (#4354)Roberto Vidal2022-12-15
| | | | | | | | | | | | | * add redraw command * update docs * Update helix-term/src/commands/typed.rs Co-authored-by: Michael Davis <mcarsondavis@gmail.com> * update docs Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* workspace symbols: Default to empty Vec on NoneMichael Davis2022-12-15
| | | | | | | A language server might send None as the response to workspace symbols. We should treat this as the empty Vec rather than the server sending an error status. This fixes the interaction with gopls which uses None to mean no matching symbols.
* Re-request workspace symbols on keypress in pickerGokul Soumya2022-12-15
| | | | | | | | | | | Most language servers limit the number of workspace symbols that are returned with an empty query even though all symbols are supposed to be returned, according to the spec (for perfomance reasons). This patch adds a workspace symbol picker based on a dynamic picker that allows re-requesting the symbols on every keypress (i.e. when the picker query text changes). The old behavior has been completely replaced, and I have only tested with rust-analyzer so far.
* Improve error message handling for theme loading failures (#5073)Michael Davis2022-12-15
| | | | | | | | | | | | | | | | | The error messages for a theme that failed to be deserialized (or otherwise failed to load) were covered up by the context/with_context calls: * The log message for a bad theme configured in config.toml would only say "Failed to deserilaize theme" * Selecting a bad theme via :theme would show "Theme does not exist" With these changes, we let the TOML deserializer errors bubble up, so the error messages can now say the line number of a duplicated key - and that key's name - when a theme fails to load because of a duplicated key. Providing a theme which does not exist to :theme still gives a helpful error message: "No such file or directory."
* Add `:pipe-to` typable command that ignores shell output (#4931)Alexander Schlögl2022-12-12
|
* reload_all: Ensure view is synced with doc history before reload (#4965)Michael Davis2022-12-02
|
* Fix nightly clippy lints (#4954)Tshepang Mbambo2022-12-01
|
* Show (git) diff signs in gutter (#3890)Pascal Kuthe2022-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Show (git) diff signs in gutter (#3890) Avoid string allocation when git diffing Incrementally diff using changesets refactor diffs to be provider indepndent and improve git implementation remove dependency on zlib-ng switch to asynchronus diffing with similar Update helix-vcs/Cargo.toml fix toml formatting Co-authored-by: Ivan Tham <pickfire@riseup.net> fix typo in documentation use ropey reexpors from helix-core fix crash when creating new file remove useless use if io::Cursor fix spelling mistakes implement suggested improvement to repository loading improve git test isolation remove lefover comments Co-authored-by: univerz <univerz@fu-solution.com> fixed spelling mistake minor cosmetic changes fix: set self.differ to None if decoding the diff_base fails fixup formatting Co-authored-by: Ivan Tham <pickfire@riseup.net> reload diff_base when file is reloaded from disk switch to imara-diff Fixup formatting Co-authored-by: Blaž Hrastnik <blaz@mxxn.io> Redraw buffer whenever a diff is updated. Only store hunks instead of changes for individual lines to easily allow jumping between them Update to latest gitoxide version Change default diff gutter position Only update gutter after timeout * update diff gutter synchronously, with a timeout * Apply suggestions from code review Co-authored-by: Blaž Hrastnik <blaz@mxxn.io> Co-authored-by: Michael Davis <mcarsondavis@gmail.com> * address review comments and ensure lock is always aquired * remove configuration for redraw timeout Co-authored-by: Blaž Hrastnik <blaz@mxxn.io> Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Call View::apply within Document::append_changes_to_historyMichael Davis2022-11-29
|
* Revert "Don't apply transactions to Views in undo/redo"Michael Davis2022-11-29
| | | | This reverts commit fd00f3a70eb626242bb2fcc9bddf2c4d94580a9a.
* reload-all: Only update viewport when view focuses on the doc (#4901)Filipe Azevedo2022-11-26
|
* Don't apply transactions to Views in undo/redoMichael Davis2022-11-24
| | | | | | View::apply should only be called by EditorView after 42e37a571e75aaf4feb1717dfebe8cf215e535dd. This change removes the duplicate calls within undo/redo which could cause a panic.
* lsp: Check server provider capabilities (#3554)Michael Davis2022-11-22
| | | | | | | | | | | | | | Language Servers may signal that they do not support a method in the initialization result (server capabilities). We can check these when making LSP requests and hint in the status line when a method is not supported by the server. This can also prevent crashes in servers which assume that clients do not send requests for methods which are disabled in the server capabilities. There is an existing pattern the LSP client module where a method returns `Option<impl Future<Output = Result<_>>>` with `None` signaling no support in the server. This change extends this pattern to the rest of the client functions. And we log an error to the statusline for manually triggered LSP calls which return `None`.
* Add preview for scratch buffers in buffer picker (#3454)A-Walrus2022-11-21
|
* Add `:reload-all` command (#4663)Filipe Azevedo2022-11-20
|
* Capture word parts while calculating shellwords (#4632)Michael Davis2022-11-17
| | | | | | | | | | | | | | | | | | | This fixes an edge case for completing shellwords. With a file "a b.txt" in the current directory, the sequence `:open a\<tab>` will result in the prompt containing `:open aa\ b.txt`. This is because the length of the input which is trimmed when replacing with completion is calculated on the part of the input which is parsed by shellwords and then escaped (in a separate operation), which is lossy. In this case it loses the trailing backslash. The fix provided here refactors shellwords to track both the _words_ (shellwords with quotes and escapes resolved) and the _parts_ (chunks of the input which turned into each word, with separating whitespace removed). When calculating how much of the input to delete when replacing with the completion item, we now use the length of the last part. This also allows us to eliminate the duplicate work done in the `ends_with_whitespace` check.
* Popup scrollbar (#4449)Manos Mertzianis2022-11-15
| | | | | | | | | | | | | | | * init * cargo fmt * optimisation of the scrollbar render both for Menu and Popup. Toggling off scrollbar for Popup<Menu>, since Menu has its own * rendering scroll track * removed unnecessary cast * improve memory allocation * small correction
* Add LSP workspace command picker (#3140)Matthias Deiml2022-11-09
| | | | | | | * Add workspace command picker * Make command typable * Add optional argument to lsp-workspace-command
* Fix command-mode completion behavior when input is escapedMichael Davis2022-11-07
| | | | | | | If `a\ b.txt` were a local file, `:o a\ <tab>` would fill the prompt with `:o aa\ b.txt` because the replacement range was calculated using the shellwords-parsed part. Escaping the part before calculating its length fixes this edge-case.
* Escape filenames in command completionMichael Davis2022-11-07
| | | | | | This changes the completion items to be rendered with shellword escaping, so a file `a b.txt` is rendered as `a\ b.txt` which matches how it should be inputted.
* Fix whitespace handling in command-mode completionMichael Davis2022-11-07
| | | | | | | | | | 8584b38cfbe6ffe3e5d539ad953c413e44e90bfa switched to shellwords for completion in command-mode. This changes the conditions for choosing whether to complete the command or use the command's completer. This change processes the input as shellwords up-front and uses shellword logic about whitespace to determine whether the command or argument should be completed.
* Resolve a bunch of upcoming clippy lintsBlaž Hrastnik2022-11-04
|
* Correctly handle escaping in completion (#4316)Armin Ronacher2022-11-01
| | | | | * Correctly handle escaping in completion * Added escaping tests
* fix: Never create automatic doc popups outside of Insert mode (#4456)Poliorcetics2022-10-28
|
* commands: Make no arg ':theme' show name (#3740)James O. D. Hunt2022-10-26
| | | | | | | | | | | | | | | | Most commands that accept an argument show their current value if no argument is specified. The `:theme` command previously displayed an error message in the status bar if not provided with an argument: ``` Theme name not provided ``` It now shows the current theme name in the status bar if no argument is specified. Signed-off-by: James O. D. Hunt <jamesodhunt@gmail.com> Signed-off-by: James O. D. Hunt <jamesodhunt@gmail.com>
* Add `:update` that will write the changes if the file has been modified. ↵Gaurav Tyagi2022-10-26
| | | | | | | | | (#4426) * add command update that will write the changes if file hasn been modified * add docs * update the docs
* nit: Do less allocations in `ui::menu::Item::label` implementationsAlexis (Poliorcetics) Bourget2022-10-21
| | | | | | This complicates the code a little but it often divides by two the number of allocations done by the functions. LSP labels especially can easily be called dozens of time in a single menu popup, when listing references for example.
* fix: write-all crash (#4384)Skyler Hawthorne2022-10-21
| | | | | | | | | | | | | | | | When we do auto formatting, the code that takes the LSP's response and applies the changes to the document are just getting the currently focused view and giving that to the function, basically always assuming that the document that we're applying the change to is in focus, and not in a background view. This is usually fine for a single view, even if it's a buffer in the background, because it's still the same view and the selection will get updated accordingly for when you switch back to it. But it's obviously a problem for when there are multiple views, because if you don't have the target document in focus, it will ask the document to update the wrong view, hence the crash. The problem with this is picking which view to apply any selection change to. In the absence of any more data points on the views themselves, we simply pick the first view associated with the document we are saving.
* flush writes on force quit (#4397)Skyler Hawthorne2022-10-21
| | | | | | When force quitting, we need to block on the pending writes to ensure that write commands succeed before exiting, and also to avoid a crash when all the views are gone before the auto format call returns from the LS.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-18 09:43:34 +0000